美国Static Clean静电棒,Static Clean充电电源,Static Clean离子气刀等产品中国代理商

¥价格面议浏览次数：1420次

产品规格：全系列产品
发货地:上海市徐汇区徐家汇街道

关键词

美国Static,Clean,Static,Clean代理商,美国Static,Clean静电棒,Static,Clean充电电源,Static,Clean离子气刀

详细说明

You have static, we have solutions

BR1200 Round Static Bar

BR2200 Rectangular Static Bar

BR4400 Extended Range Double Bar

High Output Ionization

Design for use in any environment

Optional Air Tube Assist Available

Specifications

Round: 1.9cm diameter

Overall Length: 150 ~ 3600mm

Effective Length: 76 ~ 3580mm

Ionizing Point Spacing: 1.9 or ctr

Optimum Range: 1.9 to 7.6cm

Certification: UL & CE

Power Supply: TSN75 Series/J160

High Voltage Cable: 25kVDC, 105C, UL VW-1, Standard Length 1.8m, Terminated in a user installed spring-loaded connector to mate with TSN75.

High Output Ionization

Design for use in any environment

Optional Air Tube Assist Available

Specifications

Rectangular: 1.9 X 2.2 cm

Overall Length: 150 ~ 3600mm

Effective Length: 76 ~ 3580mm

Ionizing Point Spacing: 1.9 or ctr

Optimum Range: 1.9 to 7.6cm

Mounting: Adjustable rear mounting stud 8-32 x 1.2cm

Certification: UL & CE

Power Supply: TSN75 Series/J160

High Voltage Cable: 25kVDC, 105C, UL VW-1, Standard Length 1.8m, Terminated in a user installed spring-loaded connector to mate with TSN75.

High Output Ionization

Design for use in any environment

Optional Air Tube Assist Available

Specifications

Dimensions: 6.6 X 2.54cm

Overall Length: 260 ~ 3800mm

Effective Length: 150 ~ 3650mm

Ionizing Point Spacing: 1.9 or ctr

Optimum Range: 1.3 to 20cm

Mounting: Adjustable rear mounting stud 8-32 x 1.2cm

Certification: UL & CE

Power Supply: TSN75 Series/J160

High Voltage Cable: 25kVDC, 105C, UL VW-1, Standard Length 1.8m, Terminated in a user installed spring-loaded connector to mate with TSN75.

AK1200 Series

AK2200 Series

AK3200 Series

The AK1200 comes with a static bar

Low air consumption

Balanced, uniform airflow and quiet operation

Variable Force and Flow

Ionized air for neutralizing a static charge

Available in stainless steel or aluminum

Specifications

Standard Length: 76cm, 152cm, 305cm, 457cm, 610cm, 762cm, 914cm, 1067cm

Special length up to 122cm and systems up to 3.05m are available.

Certification: UL & CE

Power Supply: TSN75 Series/J160

High Voltage Cable: 25kVDC, 105C, UL VW-1, Standard Length 1.8m, Terminated in a user installed spring-loaded connector to mate with TSN75.

The AK2200 comes with a static bar

Low air consumption

Balanced, uniform airflow and quiet operation

Variable Force and Flow

Ionized air for neutralizing a static charge

Available in stainless steel or aluminum

Specifications

Standard Length: 76cm, 152cm, 229cm, 305cm, 457cm, 610cm, 762cm, 914cm, 1067cm

Special length up to 122cm and systems up to 3.05m are available.

Certification: UL & CE

Power Supply: TSN75 Series/J160

High Voltage Cable: 25kVDC, 105C, UL VW-1, Standard Length 1.8m, Terminated in a user installed spring-loaded connector to mate with TSN75.

The AK3200 comes with a static bar

Ultra Low Air Consumption

Ultra-Quiet Operation (<65dB)

Balanced, uniform airflow and quiet operation

Variable Force and Flow

Ionized air for neutralizing a static charge

Available in stainless steel or aluminum

Specifications

Standard Length: 76cm, 152cm, 229cm, 305cm, 457cm, 610cm, 762cm, 914cm, 1067cm, 1219cm

Special length up to 122cm and systems up to 3.05m are available.

Certification: UL & CE

Power Supply: TSN75 Series/J160

High Voltage Cable: 25kVDC, 105C, UL VW-1, Standard Length 1.8m, Terminated in a user installed spring-loaded connector to mate with TSN75.


The SB-30A Charging Power Supply is a state-of-the-art 150W 30kV DC power supply designed to temporarily bond materials together using electrostatic charging applicators. The programmable output of the supply ranges from zero to greater than full-scale rating (30kV potential and 5.0mA current). The SB-30A local console provides a simple, reliable user interface for manual operation. A remote console is available for manual operation when the power supply is situated in an inconvenient or inaccessible location. The remote console, on/off footswitch and other accessories can be connected to the SB-30A Remote-Manual port. The SB-30A also features an electronic interface for fully automated operation with a PLC or similar equipment connected to the Remote-Auto port. Both ports can be wired using industry-standard DB-25 cables. The SB-30A output can be programmed for either constant-voltage (CV) or constant-current (CC) mode.

Specification	Specification (Conti.)	Specification (Conti.)
SB-30A Charging System Features ? Reversible local-console orientation (factory option) for either table or wall mounting ? Flat-panel console with membrane-switch commands, LED display and key-switch lockout ? Two full-function I/O ports for manual and automated remote operation ? Output protection for short-circuit, open-circuit and arc-over load conditions ? Input protection for under-voltage and over-voltage line conditions ? Thermal protection with over-temperature shutdown and fan-failure alert ? Large, bright voltage/current-meter with signed 3-digit LED display ? Self-mounting/stacking chassis provides top and bottom attachment without separate brackets ? Four-port output compatible with most major-brand charging applicators ? Stackable SB-30A combo available for applications requiring both positive and negative charging ? Front-panel key-switch/indicator and rear-panel configuration switches for automated operating mode Specifications Programmable Charging Modes: Constant-Voltage (CV), Constant-Current (CC) output regulation	Specifications (Conti.) Output Ratings: 0-30kV, 0-5.0mA, 150W Input Rating: 100-120 or 200-240VAC, 50/60Hz Output Ports: 4 (Electrically Common) Charging Polarity: Positive or Negative and Bipolar (Dual-Supply) Output Rise Time: <25ms(CC), <20ms(CV) Remote I/O: 25P D-subminiature socket/receptacle (DB-25F) Enclosure: Epoxy-Coated Steel, Blue Dimensions: 26.2cm W X 11.3cm H X 34.0cm D Weight: 6.7kg Operating Temperature: 0°C to 40°C StaticBond Charging Bar Specifications Overall Length: 15cm - 300cm Effective Length: 15cm shorter than overall length Diameter: 3.1cm Adjustable mounting studs for easy installation 3m of high voltage cable StaticBond Spot Charger Specifications 2 Brush Electrodes (one spare)	Specifications (Conti.) 3m HV Cable Assembly 25cm HV Cable Jumper with Spot Charger Mounting Brackets and Quick Lock connectors SB-30A StaticBond Charging System Arc Resistance Charging Bar Features When using the SBCB4000 series charging bars which is Resistively Coupled Charging Bars, the energy placed on the emitter pins or needles from the Charging Power Supply is reduced to below spark over levels. This contributes to reduced electrical noise, greater safety features and efficiency of the process.


J160 Series 4CH HV Power Supply	TSN75 Series HV Power Supply
The J160 Series Static Neutralizing Power Supplies are 4kV, 5kV and 7Kv power supply series. It is a low power, high impedance, step-up transformer, potted with internal current limits to provide appropriate power to the applicator, and safety to the user. This unique power supply features a transformer that provides constant, stable output voltage despite line voltage fluctuations. Specification Type: AC High Voltage, Constant Output Transformer Input Voltage: 115 or 230VAC Frequency: 50/60Hz Output Voltage: 4kV (J164), 5kV (J165), 7.5kV (J167) Input Current: 0.5amp Output Current: 0.005amp Dimensions: 12.4cm W X 11.4cm H X 21.8cm L Weight: 2.7kg	The TSN75 static neutralizing power supply is low power, high impedance, step-up transformer potted with internal current limits to provide appropriate power to the "applicator" and safety to the user. Its features include: A constant voltage transformer which provides stable output voltage despite line voltage fluctuations Specification Type: AC High Voltage, Constant Output Transformer Input Voltage: 115 or 230VAC Frequency: 50/60Hz Output Voltage: 7.5kV Input Current: 0.5amp Output Current: 0.005amp Dimensions: 10cm W X 8.8cm H X 14.6cm L Weight: 2.15kg

m.jevons1101.b2b168.com