英国PCS Instruments校准装置,PCS工具套件,PCS推杆套件,PCS显微镜套件,PCS温度校准插头,PCS螺钉套件,PCS夹具中国代理商

¥价格面议浏览次数：1848次

产品规格：全系列产品
发货地:上海市徐汇区徐家汇街道

关键词

英国PCS,Instruments,英国PCS代理商,校准装置,PCS工具套件,PCS推杆套件,PCS显微镜套件,PCS温度校准插头,PCS螺钉套件,PCS夹具

详细说明

HFRR高频往复仪适合于润滑性相对较差的油品（如柴油）的磨损检测，它适合用于机油、酯和其它化合物摩擦临界点的检测。符合ASTM D6079，ASTM D7688，

【详细说明】

HFRSS	PCS Instruments	HFRR螺钉套件	HFRR Screw set
HFRTOOL	PCS Instruments	HFRR工具套件	Tool Set
HFRCAL	PCS Instruments	校准装置	HFRR Calibration device
HFRCAL2	PCS Instruments	温度校准插头	Temperature calibration plugs
HFRSSP	PCS Instruments	试验球,试验片,标准样品包	HFRR Upper and Lower Specimens
HFRMICLAMP	PCS Instruments	显微镜套件	Replacement lamp for HFR microscope
HFRGRAT	PCS Instruments	HFRR套件	Calibration Graticule
HFRHYG	PCS Instruments	HFRR套件自动温度	HFRR Humidity and Temperature probe including cable & bracket
HFRRSSP	PCS Instruments	标准试样	PACK OF STANDARD TEST SPECIMENS (100 UPPER AND 100 LOWER SPECIMENS)
HFRMIC	PCS Instruments	显微镜套件	HFRR/HFR2 Metallurgical Microscope
HFRPRI	PCS Instruments	推杆套件	HFRR Pushrod Insert
HFRHB	PCS Instruments	加热块	Heater Block
HFRWT	PCS Instruments	法码	Weight set

ABS (Automated BOCLE System)

The ABS - automatic instrument to perform the ASTM D5001 test method for "Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator".

ABSSL (Automated BOCLE System Scuffing Load)

The ABSSL - automatic instrument that conforms to the requirements of ASTM D-6078 "Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)"

EHD (Elasto Hydrodynamic Lubrication)

The EHL Ultra Thin Film Measurement System is a computer controlled instrument for measuring the film thickness and traction coefficient(friction coefficient) of lubricants in the elastohydrodynamic lubricating regime.

HFRR (High Frequency Reciprocating Rig)

The HFRR is a microprocessor-controlled reciprocating friction and wear test system which provides a fast, repeatable assessment of measuring the lubricity of low-sulphur diesel fuel as specified in CEC, ASTM, ISO, IP and JIS test methods.

MPR (Pitting/Micro Pitting Rig)

The automated micropitting test rig uses the proven three point contact configuration. This allows a large number of cycles in a short period of time, greatly reducing testing time.

MTM (Mini Traction Machine)

The MTM2 is a flexible general purpose instrument for measuring the frictional properties of lubricated and unlubricated contacts under a wide range of rolling and sliding conditions.

USV (Ultra Shear Viscometer)

The USV is a computer controlled instrument capable of fully automatic viscosity measurements at 10⁷s^-1.

m.jevons1101.b2b168.com