For an attractive look when routing cables round wall projections and corners of rooms. From the smallest dimensions (15x15) up to 60x200, you can be sure of a compatible design.

Just press them on – and the end pieces create a tidy finish.

With moulded lugs (on inner corners, outer corners and flat bends) the top of the trunking is neatly finished and sawn edges well hidden. The mouldings save valuable installation time. From 15x15 to 60x200.

Thanks to GGK mouldings, changes of direction are not a problem. Moulded lugs accommodate the top part of the trunking and provide a firm seat. The mouldings elegantly conceal any cut edges.

For the size 40x60 and above, four freely movable clips are attached in the lower section of the trunking per 2 m length. For ceiling mounding we recommend that you use additional clips.

For M45 devices installation. These can be installed in trunkings of height 40mm (width 90 mm) and above. Ample space for the cabling remains. Simple snap-in fitting with cut edges neatly covered.

Separation plates serve to divide the trunking into clear sections and to separate cable bundles. They are easy to install by snapping onto the moulded mounting rails that run throughout the bottom section of the trunking.