瑞士ELESTA汽车继电器,elesta工业继电器,elesta时间继电器,elesta信号继电器,elesta特殊继电器插座及配件中国区总代理2

¥价格面议浏览次数：1734次

产品规格：全系列
发货地:上海市徐汇区徐家汇街道

关键词

瑞士ELESTA工业继电器,瑞士Elesta固态继电器,ELESTA汽车继电器

详细说明

上海盈沣元器件有限公司专业代理瑞士Elesta继电器,Elesta安全继电器,Elesta时间继电器，Elesta固态继电器，Elesta汽车继电器，Elesta工业继电器，如有需求，欢迎来电垂询,缑先生/

SIS 2 Series

The SIS 2 is a small two Contact relay with forcibly guided Contacts.

Very compact SIS2 series, 2-pole relays with forcibly guided contacts in accordance with EN 50205. In addition to their very small dimensions, this relay series stands out thanks to its high shock resistance, large exciting voltage range and low coil loss power, as well as its high switching reliability due to its notched crown contact.

Contact mounting 1NO / 1NC
Switching current range 5 mA to 6 A
Coil voltage 5 VDC to 60 VDC (non-standard coils available upon request)
Coil power 0.27W
Design (LxWxH) 29.2 x 16.6 x 16.5 mm
Approvals: UL, cUL, SEV, TüV

Areas of application: medical technology, sensors, interfaces, transportation, motion control, door control

SIS 2 Series data sheet

SIS 2 SEN Series

The SIS 2 is the most energy efficient two contact relay with forcibly guided contacts.

Very compact SIS2 series, 2-pole relays with forcibly guided contacts in accordance with EN 50205. An outstanding benefit is the very low coil energy need. (nominal output of 200 mW and a holding power of 40 mW). In addition to their very small dimensions, this relay series stands out thanks to its high shock resistance, large exciting voltage range and very low intrinsic heating, as well as its high contact reliability due to its established notched crown contact.

Contact mounting 1NO / 1NC
Switching current range 3 mA to 6 A
Coil voltage 3 VDC to 60 VDC (non-standard coils available upon request)
Coil power 0.200 W
Design (LxWxH) 29.2 x 16.6 x 16.5 mm
Approvals: UL, cUL, SEV, TüV

Areas of application: medical technology, sensors, interfaces, transportation, motion control, door control

SIS 2 SEN Series data sheet

SIS 3 Series

The SIS 3 is the smallest 3 contact relay with forcibly guided contacts.

Very compact SIS3, series 3-pole relays with forcibly guided contacts in accordance with EN 50205. In addition to their very small dimensions, this relay series stands out thanks to its high shock resistance, large exciting voltage range and low coil loss power, as well as its high switching reliability due to its notched crown contact.

Contact mounting 2NO / 1NC
Switching current range 5 mA to 6 A
Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
Coil power 0.6 W
Design (LxWxH) 29.2 x 16.6 x 16.5 mm
Approvals: UL, cUL, SEV, TüV

Areas of application: medical technology, sensors, interfaces, transportation, motion control, door control

SIS 3 Series data sheet

SIS 3 sensitive Series

The SIS 3 sensitive is the smallest 3 contact relay with forcibly guided contacts with a sensitive coil.

Very compact SIS3 SEN, series 3-pole relays with forcibly guided contacts in accordance with EN 50205. In addition to their very small dimensions, this relay series stands out thanks to its high shock resistance, large exciting voltage range and low coil loss power, as well as its high switching reliability due to its notched crown contact.

Contact mounting 2NO / 1NC
Switching current range 5 mA to 6 A
Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
Coil power 0.4 W
Design (LxWxH) 29.2 x 16.6 x 16.5 mm
Approvals: UL, cUL, SEV, TüV

Areas of application: medical technology, sensors, interfaces, transportation, motion control, door control

SIS 3 sensitive Series data sheet

SIS 4 Series

The SIS 4 is a 4 contact relay forcibly guided contacts and very small dimensions

Very compact SIS4 series, 4-pole relays with forcibly guided contacts in accordance with EN 50205. In addition to very small dimensions, its striking features are a high shock resistance, large exciting voltage range and low coil power loss, as well as its high switching reliability due to its notched crown contact.

Contact mounting 2NO / 2NC or 3NO / 1NC
Switching current range 5 mA to 6 A
Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
Coil power 0.5 W
Design (LxWxH) 48 x 16.6 x 16.5 mm
Approvals: UL, cUL, SEV, TüV

Areas of application: off-shore applications, interfaces, medical technology, robotics, machine tools, remote control

SIS 4 Series data sheet

SIS 6 Series

The SIS6 is a small 6 contact relay with forcibly guided contacts.

Very compact SIS6, 6-pole relays with forcibly guided contacts in accordance with EN 50205. In addition to their very small dimensions, this relay series stands out thanks to its high shock resistance, large exciting voltage range and low coil loss power, as well as its high switching reliability due to its notched crown contact .

Contact mounting 4NO / 2NC
Switching current range 5 mA to 6 A
Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
Coil power 0.66 W
Design (LxWxH) 48 x 16.6 x 16.5 mm
Approvals: UL, cUL, SEV, TüV

Areas of application: shore applications, interfaces, medical technology, robotics, machine tools, remote control

SIS 6 Series data sheet

SIF 3 Series

The SIF 3 relay is a small and above all flat 3-contacts relay with forcibly guided contacts.

The SIF 3 series contains 3-pole relays with forcibly guided contacts according with EN 50205 in an extremely flat design (10.9 mm). This relay series stands out for a large switching current range. Component installation under the relay is possible.

Contact mounting 2NO / 1NC
Switching current range 3 mA to 10 A
Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
Coil power 0.6 W
Design (LxWxH) 33.65 x 29.25 x 10.9 mm
Approvals: UL, cUL, TüV

Areas of application: access control, interfaces, transportation, robotics, machine tools

SIF 3 Series data sheet

SIF 4 Series

The SIF 4 relay is a small and above all flat 4 contacts relay with forcibly guided contacts.

The SIF 4 series contains 4-pole relays with forcibly guided contacts according with EN 50205 in an extremely flat design (10.9 mm). This relay series stands out for a large switching current range. Component installation under the relay is possible.

Contact mounting 3 NO / 1 NC
Switching current range 3 mA to 8 A
Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
Coil power 0.7 W
Design (LxWxH) 41 x 29.4 x 10.9 mm
Approvals: UL, cUL, TüV

Areas of application: access control, interfaces, transportation, robotics, machine tools

SIF 4 Series data sheet

SIF 6 Series

The SIF 6 relay is only 10,9 mm flat with 6 contacts.

The SIF6 series contains 6-pole relays with forcibly guided contacts according with EN 50205 in an extremely flat design (10.9 mm). This relay series stands out for a large switching current range. Component installation under the relay is possible.

Contact mounting 4NO / 2NC
Switching current range 5 mA to 8 A
Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
Coil power 0.66 W
Design (LxWxH) 53.6 x 33.5 x 10.9 mm
Approvals: UL, cUL, SEV, TüV

Areas of application: process technology, mining, lifting technology, interfaces, remote control

SIF 6 Series data sheet

SGR 282 ZK series

New series

Series SGR 282 ZK, the classic 2 contacts relay with forcibly guided contacts, according to EN 50205 with CO contacts. New design with sensitive coil and notch-crown-contacts

The SGR 282 ZK series, a classic 2-pole relays with forcibly guided contacts in accordance with EN 50205 in change-over contact design and a 5.04 mm grid. The extrusion-coated coil design is also suitable for use in ATEX areas. They achieve highest reliability due to notch-grown-contact system, sensitive coil and load current 4mA to 8A. (Available September 2013)

Contact Mounting 2CO
Switching current range 4 mA to 8 A
Coil-Voltage 5 VDC to 110 VDC (non-standard coils available upon request)
Coil Power 0.7 W
Design(LxWxH) 30.2 x 12.7 x 25.6 mm
Approvals UL, cUL, TüV
DIN rail socket with modules, PCB socket

Areas of application: Process Industry, Mining, Sensors, Interfaces

SGR 282 ZK series data sheet

SGR 282 ZK Var1 / Var2 series

New series with two variations of contact positioning

Series SGR 282 ZK, the classic 2 contacts relay with forcibly guided contacts, according to EN 50205 with 1 NO and 1 NO contact, available in two contact variations. New design with sensitive coil and notch-crown-contacts.

The SGR 282 ZK series, a classic 2-pole relays with forcibly guided contacts in accordance with EN 50205 in 1 NO and 1 CO design and a 5.04 mm grid. The extrusion-coated coil design is also suitable for use in ATEX areas. They achieve highest reliability due to notch-grown-contact system, sensitive coil and a load current of 4mA to 8A (available December 2013). The position of NO and NC is arbitrary left or right.

Contact Mounting 1 NO / 1 NC
Switching current range 4 mA to 8 A
Coil-Voltage 5 VDC to 110 VDC (non-standard coils available upon request)
Coil Power 0.7 W
Design(LxWxH) 30.2 x 12.7 x 25.6 mm
Approvals UL, cUL, TüV
DIN rail socket with modules, PCB socket

Areas of application: Process Industry, Mining, Sensors, Interfaces

SGR 282 ZK Var1 / Var2 series data sheet

SGR 282 Z Series

Not for new designs

Will be replaced by SGR 282 ZK! SGR 282 Z, the classic 2 contacts relay with forcibly guided contacts, according to EN 50205 with CO contacts.

The SGR282 Z series include classic 2-pole relays with forcibly guided contacts in accordance with EN 50205 in change-over contact design and a 5.04 mm grid. Extrusion-coated coil design also suitable for use in ATEX areas.

Contact Mounting 2CO
Switing current range10 mA to 6 A
Coil-Voltage 5 VDC to 110 VDC (non-standard coils available upon request)
Coil Power 1 W
Design(LxWxH) 30.2 x 12.7 x 25.6 mm
ApprovalsUL, cUL, SEV, TüV
DIN rail socket with modules, PCB socket

Areas of application: Process Industry, Mining, Sensors, Interfaces

SGR 282 Z Series data sheet

SGR 282 Z sensitive Series

Not for new designs! Will be replaced by SGR 282 ZK.

Series SGR 282 Z SEN, the classic 2 contacts relay with forcibly guided contacts, according to EN 50205 with CO contacts.

Contact Mounting 2CO
Switing current range10 mA to 6 A
Coil-Voltage 5 VDC to 110 VDC (non-standard coils available upon request)
Coil Power 0.7 W
Design(LxWxH) 30.2 x 12.7 x 25.6 mm
Approvals UL, cUL, SEV, TüV
DIN rail socket with modules, PCB socket

Areas of application: Process Industry, Mining, Sensors, Interfaces

SGR 282 Z sensitive Series data sheet

SIR 282 Series

Not for new designs! Will be replaced by SGR 282 ZK.

Serie SIR 282 the classic 2 contacts relay with forcibly guided contacts, according to EN 50205 with CO contacts.

The SIR282, series include classic 2-pole relays with forcibly guided contacts in accordance with EN 50205 in change-over contact design and a 5.08 mm grid. Extrusion-coated coil design also suitable for use in ATEX areas.

Contact mounting 2CO
Switching current range 10 mA to 8 A
Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
Coil power 1 W
Design (LxWxH) 30.2 x 12.7 x 25.6 mm
Approvals: UL, cUL, SEV, TüV
Manipulation-protected socket for DIN rail and PCB mounting

Areas of application: process technology, mining, lifting technology, interfaces, remote control

SIR 282 Series data sheet

SIR 282 sensitive Series

Not for new designs! Will be replaced by SGR 282 ZK.

SIR 282 SEN the classic 2 contacts relay with forcibly guided contacts, according to EN 50205 with CO contacts.

The SIR282 SEN, series include classic 2-pole relays with forcibly guided contacts in accordance with EN 50205 in change-over contact design and a 5.08 mm grid. Extrusion-coated coil design also suitable for use in ATEX areas.

Contact mounting 2CO
Switching current range 10 mA to 8 A
Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
Coil loss power 0.7 W, sensitive design
Design (LxWxH) 30.2 x 12.7 x 25.6 mm
Approvals: UL, cUL, SEV, TüV
DIN rail socket with modules, PCB socket

Areas of application: process technology, mining, sensors, interfaces

SIR 282 sensitive Series data sheet

SIM 2 Series

SIM2. Compact 2-pole relay with forcibly guided contacts according to EN 50205 and extrusion-coated coil design which is also suitable for use in the ATEX area.

The SIM2, series include compact 2 pole relays with forcibly guided contacts in accordance with EN 50205, with extrusion-coated coil design which is also suitable for use in the ATEX area. Crown contacts for high switching reliability. Extremely high air gaps and creepage distances.

Contact mounting 1NO / 1NC
Switching current range 10 mA to 8 A
Coil voltage 5 VDC to 110VDC (non-standard coils available upon request)
Coil loss power 0.5 W
Design (LxWxH) 24.7 x 12.7 x 25.6 mm
Approvals: UL, cUL, SEV, TüV

Areas of application: process technology, mining, lifting technology, interfaces, remote control

SIM 2 Series data sheet

SIM 3 Series

Compact 3-pole relay with forcibly guided contacts according to EN 50205 and extrusion-coated coil design which is also suitable for use in the ATEX area.

The SIM3 series, include compact 3 pole relays with forcibly guided contacts in accordance with EN 50205, with extrusion-coated coil design which is also suitable for use in the ATEX area. Crown contacts for high switching reliability. Extremely high air gaps and creepage distances.

Contact mounting 2NO / 1NC
Switching current range 10 mA to 8 A
Coil voltage 5 VDC to 110VDC (non-standard coils available upon request)
Coil loss power 0.75 W
Design (LxWxH) 36.1 x 12.7 x 25.6 mm
Approvals: UL, cUL, SEV, TüV
Manipulation-protected socket for DIN rail and PCB mounting

Areas of application: process technology, mining, lifting technology, interfaces, remote control

SIM 3 Series data sheet

SIM 4 Series

Compact 4-pole relay with forcibly guided contacts according to EN 50205 and extrusion-coated coil design which is also suitable for use in the ATEX area.

The SIM4 series, include compact 4 pole relays with forcibly guided contacts in accordance with EN 50205, with extrusion-coated coil design which is also suitable for use in the ATEX area. Crown contacts for high switching reliability. Extremely high air gaps and creepage distances.

Contact mounting 2NO / 2NC or 3NO / 1NC
Switching current range 10 mA to 8 A
Coil voltage 5 VDC to 110 VDC (non-standard coils available upon request)
Coil power loss 1 W
Design (LxWxH) 36.1 x 12.7 x 25.6 mm
Approvals: UL, cUL, SEV, TüV
Manipulation-protected socket for DIN rail and PCB mounting

Areas of application: process technology, mining, lifting technology, interfaces, remote control

SIM 4 Series data sheet

SLR 4 Series

Ppowerful, horizontal 4-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 10 A. Crown contacts for high switching reliability.

The SLR4, series contains powerful, horizontal 4-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 10 A. Crown contacts for high switching reliability.

Contact mounting 2NO / 2NC or 3NO / 1NC
Switching current range 10 mA to 10 A
Coil voltage 6 VDC to 110 VDC (non-standard coils available upon request)
Coil loss power 0.6 W
Design (LxWxH) 53.3 x 33.4 x 16.5 mm
Approvals: UL, cUL, SEV, TüV

Areas of application: mechanical engeneering, plant construction, railway technology, machine tools

SLR 4 Series data sheet

SIR 4 Series

Contains powerful, compact 4-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 10 A. Crown contacts for high switching reliability.

The SIR4 series contains powerful, compact 4-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 10 A. Crown contacts for high switching reliability.

Wide coil working ranges
Contact mounting 2NO / 2NC or 3NO / 1NC
Switching current range 10 mA to 10 A
Coil voltage 6 VDC to 110 VDC (non-standard coils available upon request)
Coil loss power 0.6 W
Design (LxWxH) 46.4 x 16 x 30.7 mm
Approvals: UL, cUL, SEV, TüV
Manipulation-protected socket for PCB mounting

Areas of application: process technology, lifts, machine tools, vehicle construction

SIR 4 Series data sheet

SIR 4 sensitive Series

Contains powerful, compact 4-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 10 A. Crown contacts for high switching reliability.

Wide coil working ranges
Contact mounting 2NO / 2NC or 3NO / 1NC
Switching current range 10 mA to 10 A
Coil voltage 6 VDC to 110 VDC (non-standard coils available upon request)
Coil loss power 0.36 W
Design (LxWxH) 46.4 x 16 x 30.7 mm
Approvals: UL, cUL, SEV, TüV
Manipulation-protected socket for PCB mounting

Areas of application: process technology, lifts, machine tools, vehicle construction

SIR 4 sensitive Series data sheet

SIR 4 Power Series

Contains extremely powerful, compact 4-pole power relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 12 A. 2 powerful contacts for loads with a high surge current (up to 60A) in the AC and DC range and 2 monitoring contacts.

Crown contactsfor high switching reliability. Wide coil working range.

Contact mounting 2NO / 2NC or 3NO / 1NC
Switching current range 10 mA to 12 A
Coil voltage 6 VDC to 110 VDC (non-standard coils available upon request)
Coil loss power 0.75 W
Design (LxWxH) 46.4 x 16 x 30.7 mm
Approvals: UL, cUL, SEV, TüV

Areas of application: door controls, motion control, transportation, farm machinery

SIR 4 Power Series data sheet

SIR 6 Series

Contains powerful, compact 6-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 10 A. Crown contacts for high switching reliability.

Wide coil working ranges
Contact mounting 5NO / 1NC, 4NO / 2NC or 3NO / 3NC
Switching current range 10 mA to 10 A
Coil voltage 6 VDC to 110 VDC (non-standard coils available upon request)
Coil loss power 0.75 W
Design (LxWxH) 58.9 x 16 x 30.7 mm
Approvals: UL, cUL, SEV, TüV
Manipulation-protected socket for PCB mounting

Areas of application: lifts, machine tools, construction machinery, transportation, robotics

SIR 6 Series data sheet

SIR 6 sensitive Series

The SIR6 SEN, series contains powerful, compact 6-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 10 A. Crown contacts for high switching reliability.

Wide coil working ranges
Contact mounting 5NO / 1NC, 4NO / 2NC or 3NO / 3NC
Switching current range 10 mA to 10 A
Coil voltage 6 VDC to 110 VDC (non-standard coils available upon request)
Coil loss power 0.5 W
Design (LxWxH) 58.9 x 16 x 30.7 mm
Approvals: UL, cUL, SEV, TüV
Manipulation-protected socket for PCB mounting

Areas of application: lifts, machine tools, construction machinery, transportation, robotics

SIR 6 sensitive Series data sheet

SIR 8 Series

Contains powerful, compact 8- pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 10 A. Crown contacts for high switching reliability. Wide coil working ranges.

Wide coil working ranges
Contact mounting with more than 10 variations
Switching current range 10 mA to 10 A
Coil voltage 6 VDC to 110 VDC (non-standard coils available upon request)
Coil loss power 1.3 W
Design (LxWxH) 85.5 x 20 x 32 mm
Approvals: UL, cUL, SEV, TüV
Manipulation-protected socket for PCB mounting

Areas of application: lifts, machine tools, construction machinery, transportation, robotics

SIR 8 Series data sheet

SIR 10 Series

Contains powerful, compact 10-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 10 A. Crown contacts for high switching reliability. Wide coil working ranges.

Wide coil working ranges
Contact mounting more than 10 variations
Switching current range 10 mA to 10 A
Coil voltage 6 VDC to 110 VDC (non-standard coils available upon request)
Coil loss power 1.3 W
Design (LxWxH) 85.5 x 20 x 32 mm
Approvals: UL, cUL, SEV, TüV
Manipulation-protected socket for PCB mounting

Areas of application: lifts, machine tools, construction machinery, transportation, robotics

SIR 10 Series data sheet

SIP 6 Series

The SIP6 series contains extremely powerful 6-pole relays with forcibly guided contacts in accordance with EN 50205 for switching loads up to 16 A. Crown contacts for high switching reliability at the two readback contacts and 4 power contacts up to 16A and 60A surge currents.

For the highest loads during 3-phase applicatio