上海盈沣元器件有限公司专业代理销售美国Dynatrol液位开关，Dynatrol粘度计，Dynatrol料位开关，Dynatrol数字粘度转换器
如有需求，欢迎来电垂询 缑先生
|
Dynatrol? CL-10DJ Level Switch for Bulk Solids
The Dynatrol? CL-10DJ Vibrating Level Switch is designed for high-, intermediate- or low-point level detection of bulk solids. The CL-10DJ is typically used with bulk solids in the density range of 15-60 lbs/ft3.
|
|
|
|
|
|
Dynatrol? CL-10DJ-7 Level Switch for Bulk Solids
The Dynatrol? CL-10DJ-7 Vibrating Level Switch is designed for high-, intermediate- or low-point level detection of bulk solids. The CL-10DJ-7 is typically used with bulk solids with a density greater than 60 lbs/ft3.
|
|
|
|
|
|
Dynatrol? GJ Level Switch for Light Bulk Solids
The Dynatrol? CL-10GJ Level Detector operates with consistent results on problem applications that have a tendency to bridge or pack. It handles difficult products such as flour, cocoa, sugar, pharmaceutical powders, powdered lime and additional bulk solid materials for high-, intermediate- or low-point level detection. The CL-10GJ is typically used with bulk solids in the density range of 10-15 lbs/ft3.
|
|
|
|
|
|
Dynatrol? GSS Level Sensor Switch for Extremely Lightweight Bulk Solids
The Dynatrol? CL-10GSS Level Detector may be used for high-, intermediate-, or low-point level detection of bulk solids. It is constructed to handle extremely light weight applications that are difficult to measure like glass fibers, glass wool, paper dust, polyester powders and polymer powders. The CL-10GSS is typically used with bulk solids in the density range of <5 lbs/ft3.
|
|
|
|
|
|
Dynatrol? GS Level Sensor Switch for Low Density Bulk Solids
The Dynatrol? GS Level Sensor Detector is designed for application to high, intermediate, or low point level detection of bulk solids. The GS Level Detector successfully handles lightweight media applications that are difficult to measure or detect like fine low density powders, flock, fluff or fumed silica, etc.The CL-10GS is typically used with bulk solids in the density range of 5-10 lbs/ft3.
|
|
|
|
|
|
Dynatrol? Sealed & Suspended Level Switch
The Sealed and Suspended Dynatrol? Detector is designed for high point level detection of bulk solids. For problem applications, such as those associated with angle-of-repose, this configuration provides reliable operation in hard to reach locations.
|
|
|
|
|
|
EC-501A & EC-501A(G) Control Unit
The Dynatrol? EC-501A and EC-501A(G) Control Unit combines with the DJ and G Series Dynatrol? Level Detectors, including Sealed and Suspended units. Within the Control Units, a SPDT relay is operated from the On/Off signal of the Dynatrol? Level Detector. Simply actuate process control equipment, level alarms or indicator lights from the contacts of this control unit.
|
|
|
|
|
Dynatrol? CL-10GH Liquid Level Switch
The Dynatrol? CL-10GH Liquid Level Detector and EC-501A(G) Control Unit is used for high, intermediate or low point level detection of liquids and slurries. A unique vibrating principle permits design and operation features not available with other types of liquid level detectors.
|
|
|
|
|
|
Dynatrol? CL-10RH Liquid Level Switch
The Dynatrol? Type CL-10RH Liquid Level Detector and EC-102B or EC-103C Control Unit is used for high, intermediate or low point level detection of liquids and slurries. This is typically a replacement unit for existing CL-10RH units in the field. The CL-10GH is phasing out the older style liquid level detector.
|
|
|
|
|
m.jevons1101.b2b168.com
公司首页
供应商机
关于我们
公司动态
荣誉认证
招聘中心
客户案例
产品知识
联系方式
1017894018